
No.274
PUMMEL TESTER
Overview of PUMMEL TESTER
This tester is for evaluating the bondage of PVB film fragments inside safety glass composites used for automobiles.
The glass is constantly impacted by hammer while moving in an S shape.
The specimen is then evaluated according to the Pummel value by the level of exposed PVB surface.
Operation VIDEO
Specification
| Specifications are subject to change without notice. | |
|---|---|
| Test Specimen | 305 × 160 × 2.5 to 10 mm |
| Hammer | Striking Method: Hammer Striking Down Method + Assist Spring Impact Adjustment: Spring Screw Adjust Method |
| Horizontal Distance | Stroke: 150 mm |
| Vertical Distance | Stroke: 90 mm |
| Testing Speed | Approx. 120 sec. for 1 pc |
| Other Standard Specification | Room Light, Blank Shot Prevent System (Specimen Detect Sensor) |
| Power Source | AC 200 V, 3-Phase, 10 A, 50/60 Hz |
| Dimensions/ Weight (Approx.) | Main Body: W880 × D1,100 × H1,164 mm, 620 kg Control Box: W250 × D700 × H1,130 mm, 60 kg |
Other products
- Evaluating flammability (oxygen index) of plastics and rubbers | OXYGEN INDEX FLAMMABILITY TESTER / No.214

- Evaluating indentation and residual indentation of floorings | MCBURNEY INDENTATION TESTER & RESIDUAL INDENTATION TESTER / No.184-A / No.184-B

- Measuring softening point of enameled wires (cross over method) | CUT-THROUGH TESTER (FOR ENAMELED WIRE) / No.173-S

- Evaluating rub resistance, set-off, and paper fuzzing of printing inks | SUTHERLAND TYPE RUB TESTER / No.528

- Evaluating water absorption of highly absorbent paper | KLEMM CAPILLARY RISE TESTER / No.310

- Evaluating mechanical stability of synthetic latex | MARON MECHANICAL STABILITY TESTER / No.156

- Evaluating stiffness of woven fabrics (cantilever method) | CANTILEVER FABRIC STIFFNESS TESTER / No.476

- Evaluating abrasion resistance of plastics and rubbers | TABER TYPE ABRASION TESTER / No.101-H

- Evaluating bending strength and flexing resistance of thin leather | FLEXOMETER/BALLY FLEX TESTER / No.197

- Evaluating wet expansibility and contraction of paper | FENCHEL EXPANSION AND CONTRACTION TESTER / No.309

