No.219
BENCHTOP HOT PRESS
Overview of BENCHTOP HOT PRESS
This pressure compacting machine is used to compress plastic and rubber.
It is designed compactly so that it can be installed in testing labs.
Specification
| Specifications are subject to change without notice. | |
|---|---|
| Platen Size | 200 × 200 mm |
| Platen Opening | Max. 90 mm |
| Cylinder Diameter | φ45 mm |
| Maximum Force | 100 kN (Hydraulic 62.9 MPa) |
| Temperature Range | Max. 300 °C (Option: Max. 400 °C) |
| Option | Water Cooling Platan |
| Power Source | AC 200 V, 1-Phase, 20 A, 50/60 Hz |
| Dimensions/ Weight (Approx.) | W465 × D400 × H781 mm, 169 kg |
Other products
- Evaluating Creep Properties (Static Strain, Compression, Bending) of Plastics and Rubbers | CREEP TESTER / No.145
- No.156 Maron Mechanical Stability Tester【YASUDA-SEIKI】This tester evaluates the mechanical stability of synthetic latex
- No.173-S CUT-THROUGH TESTER (FOR ENAMELED WIRE)｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- No.258-ZA IMPACT TESTER (FULL AUTOMATIC)
- No.162 Slip Tester｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- No.183 FALLING BALL IMPACT TESTER
- No.216 Yasuda’s Material Tester, Capable of Testing Strain, Compression, and 3 Point Bending!
- No.307 MIT TYPE FOLDING ENDURANCE TESTER
- No.128-3S SAMPLE DIMENSIONING DEVICE (AUTOMATIC) for Impact Testing
- No.120-FWP Melt Flow Index Tester (Manual)
