Evaluating strain, compression, and 3-point bending strength of general materials | UNIVERSAL MATERIAL TESTER / No.216

• No.216-5kN UNIVERSAL MATERIAL TESTER
• No.216-10kN UNIVERSAL MATERIAL TESTER

Overview of UNIVERSAL MATERIAL TESTER

This universal tensile elongation/ compression tester (Auto Strain/ Strograph) is best suited for plastic and rubber.
The tester capacity comes in either a maximum of 5 kN respectively.
The test specimen is attached to chucks on both ends and is applied elongation/ compression force continuously through loadcell until breakage.
Tester control and tensile strength calculation are both conducted via touch panel interface.

Specification

Specifications are subject to change without notice.
Model	No.216-5kN　UNIVERSAL MATERIAL TESTER
Test Load	Max. 5 kN
Stroke	1,000 mm*
Test Speed	1 to 1,000 mm/min
Accessories	Chuck shapes are to be consulted.
Options	CSV Export Software, Extensometer (Stroke: 50 to 500 mm, Accuracy: ± 0.5 mm)
Power Source	AC 100 V, 1-Phase, 10 A, 50/60 Hz
Dimensions/ Weight (Approx.)	W550 × D700 × H1,630 mm, 125 kg

* The Chucks/ Loadcell length is not included.

---

Overview of UNIVERSAL MATERIAL TESTER

This universal tensile elongation/ compression tester (Auto Strain/ Strograph) is best suited for plastic and rubber.
The tester capacity comes in either a maximum of 10 kN respectively.
The test specimen is attached to chucks on both ends and is applied elongation/ compression force continuously through loadcell until breakage.
Tester control and tensile strength calculation are both conducted via touch panel interface.

Specifications are subject to change without notice.
Model	No.216-10kN　UNIVERSAL MATERIAL TESTER
Test Load	Max. 10 kN
Stroke	1,000 mm*
Test Speed	1 to 500 mm/min
Accessories	Chuck shapes are to be consulted.
Options	CSV Export Software, Extensometer (Stroke: 50 to 500 mm, Accuracy: ± 0.5 mm)
Power Source	AC 100 V, 1-Phase, 10 A, 50/60 Hz
Dimensions/ Weight (Approx.)	W860 × D750 × H1,610 mm, 172 kg

* The Chucks/ Loadcell length is not included.