No.181 FILM IMPACT TESTER

• No.181 FILM IMPACT TESTER
• No.181-L FILM IMPACT TESTER (WITH REFRIGERATING MACHINE)

Overview of  FILM IMPACT TESTER

This tester is used to evaluate the impact hole punching endurance of plastic film, paper etc.
A hemispherical impact ball is attached to the head of the pendulum so that the impact workload to punch a hole into the test specimen can be directly read on the scale.
The tester can also be assorted with a low temperature chamber to conduct the impact test at low temperature.

Reference Standards

ASTM D3420

Specification

Specifications are subject to change without notice.
Model	No.181　FILM IMPACT TESTER
Capacity	0 to 1.5 Ｊ (Scale 0.05 J), 0 to 3.0 Ｊ (Scale 0.1 J) (2 ranges)
Impact Head	Hemispherical shape, R12.7 mm, R6.35 mm
Lift-Up Angle	90° (Additional Weight type)
Specimen	φ80 mm
Clamp	Inner φ60 mm
Option	Digital Display Ver.
Dimensions/ Weight (Approx.)	W640 × D200 × H530 mm, 68 kg

---

Overview of  FILM IMPACT TESTER (WITH REFRIGERATING MACHINE)

This tester can also be prepared with a low temperature chamber in order to conduct the test at low temperature.

Reference Standards

ASTM D3420

Specification

Specifications are subject to change without notice.
Model	No.181-L　FILM IMPACT TESTER (WITH REFRIGERATING MACHINE)
Capacity	0 to 1.5 Ｊ (Scale 0.05 J), 0 to 3.0 Ｊ (Scale 0.1 J) (2 ranges) 0 to 3.0 J (Scale 0.1 J), 0 to 6.0 J (Scale 0.2 J)
Impact Head	Hemispherical shape, R12.7 mm, R6.35 mm
Lift-Up Angle	90° (2 Stage Type)
Specimen	φ80 mm
Clamp	Inner φ60 mm
Temperature Range	-35 °C to 60 °C (Refrigerator)
Option	Digital Display Ver.
Power Source	AC 200 V, 3-Phase, 20 A, 50/60 Hz
Dimensions/ Weight (Approx.)	W1,060 × D1,530 × H1,210 mm, 340 kg