No.162-EW
SLIP TESTER (FOR ENAMELED WIRE)
Overview of SLIP TESTER (FOR ENAMELED WIRE)
This tester is used to measure the Inclination Angle(Static Friction Coefficient) when the test specimen of enabled wire starts sliding.
Fix 2 specimens parallel to one another onto the Sled and Inclination Board.
Put the tension to 2 specimens on the board. Set the Sled on the Board, making each specimen get crossed when the Angle is 0°.
Measure the Angle when the Mass starts sliding while the Board gets inclining at a certain speed. Static Friction Coefficient will be calculation as tanθ from the measured Angle.
Reference Standards
JIS C 3216-3 (Annex B)
Specification
| Specifications are subject to change without notice. | ||
|---|---|---|
| Model | No.162-EW | No.162-EWD |
| Sled | Width 120 mm, length 120 mm, mass 500 g | |
| Angle of Incline | 0–90˚ (scale graduation 0.2˚) | 0–90˚ (scale graduation 0.2˚) *touchscreen display 0.01° |
| Rate of Incline | 1°/s | |
| Options | Adjustable rate of incline | |
| Power Source | AC 100 V 1-phase 3 A 50/60 Hz | AC 100 V 1-phase 5 A 50/60 Hz |
| Dimensions and Weight (Approx.) | W750×D270×H425 mm, 30 kg | W750×D270×H425 mm, 30 kg |
Other products
- No.201 Vinyl Leather Cloth Cold Proof Tester
- No.153 GEL TIME TESTER | The Best Suited Tester for Gel Time Measurement of Thermoplastic Resin
- No.453 Pilling Tester, No.473 Snag Tester｜For ICI Type Tester to conduct on textile and fabric
- No.524 Print Ink Drying Tester【Yasuda Seiki】For the tester to evaluate the drying characteristics of planographic ink
- No.185 PARALLEL PLATE PLASTOMETER（Automatic）｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- No.315 ELMENDORF TYPE TEARING RESISTANCE TESTER
- No.307 MIT TYPE FOLDING ENDURANCE TESTER
- No.120-LABOT Melt Flow Index Tester (Full Automatic)
- No.215 SCRAPE TESTER(ONE DIRECTION TYPE)
- No.119 DE MATTIA FLEX CRACKING AND CRACK GROWTH TESTER 【YASUDA-SEIKI】 For Flex / Crack Growth / Aging of Rubber Materials
