Overview of CREEP TESTER (PULLEY TYPE/ BALANCE TYPE)
This tester is used to measure the increasing creep by applying static load to plastic test specimens.
By choosing the Chuck, the tester enables to conduct tensile test, condensation test, and bending test.
Reference Standards
JIS K7115、ASTM D2990、ISO 899-1
Specification
| Specifications are subject to change without notice. | ||
| Model | No.145-A | No.145-B |
|
Number of Test Samples |
3, 6, or 10 samples per test | |
| Specimen |
Refer to JIS K7161 | |
|
Loading System |
Pulley |
Balance Scale |
|
Load |
Max. 500 N (50 kgf) |
Max. 5 kN (500 kgf) |
|
Displacement |
Magnetrostrictive linear displacement transducer(resolution: 0.01 mm, measurement range: 150 mm) |
Magnetrostrictive linear displacement transducer(resolution: 0.01 mm, measurement range: 40 mm) |
|
Temperature |
Max. 200℃ (Option: 300℃) | |
|
PC Software |
Available for Windows | |
|
Options |
Compression frame and platens, bend fixtures, low-temperature chamber, temperature and humidity chamber, split chamber, displacement measurement within the gauge length | |
| Power Source |
Vary according to the tester specs. | |
|
Dimensions and Weight (Approx.) |
Vary according to the tester specs. | |
Overview of CREEP TESTER (SERVOMOTOR TYPE)
Adding a servomotor to the usual actual load type creep tester, and detecting the load using a load cell, the servomotor type creep tester can effectively reduce impact when the test specimen breaks, simultaneously saving space.
By choosing the Chuck, the tester enables conducting tensile stress relaxation tests and the condensation stress relaxation test.
Stress relaxation testing specifications can also be added.
Reference Standards
IS K7115, ASTM D2990, ISO 899-1(CREEP TEST), JIS K6263, ISO 3384(STRESS RELAXATION TEST)
Specification
| Specifications are subject to change without notice. | |
|
Number of Test Samples |
3, 6, or 10 samples per test |
|
Test Sample |
Refer to JIS K7161, JIS-K6263 |
|
Loading System |
Servomotor |
|
Load |
Max. 5 kN (500 kgf), Max. 10 kN (1,000kgf) |
|
Load Measurement | Load Cell |
|
Displacement Measurement |
Magnetrostrictive linear displacement transducer |
|
Temperature |
Max. 200℃ (Option: 300℃) |
|
PC Software |
Available for Windows |
|
Options |
Compression frame and platens, bend fixtures, low-temperature chamber, temperature and humidity chamber, split chamber, displacement measurement within the gauge length, stress relaxation test specification |
| Power Source |
Vary according to the tester specs. |
|
Dimensions and Weight (Approx.) |
Vary according to the tester specs. |
Other products
- No.140-SAS AUTOMATIC CAPILLARY RHEOMETER 【YASUDA-SEIKI】For Evaluating the Flow Characteristics of Plastic Materials
- No.310 KLEMM CAPILLARY RISE TESTER｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- No.307 MIT Type Folding Endurance Teste【YASUDA SEIKI】For the tester to evaluate the folding endurance of paper board, plastic film, and flexible print circuit board
- No.120-SAS Melt Flow Index Tester (Automatic)
- No.352 GURLEY TYPE WATER ABSORPTIVENESS TESTER(COBB METHOD）｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- No.402 Spray Tester【YASUDA SEIKI】For the tester to conduct a water repellency test (spray test) on textile・rubber・plastic
- No.605 PAR MARTON TYPE RUBBER BUFFER｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- No.214 Details about Yasuda’s FLAMMABILITY TESTER! For testing Plastic, Rubber, and Textile Materials
- No.553 PENCIL SCRATCH HARDNESS TESTER (Wolff-Wilborn Method) Determine the scratch hardness of a film coating by pencil hardness test. Available for demonstration!
- No.550 Gardner Type Mandrel Bending Tester【YASUDA SEIKI】To evaluate the bending stress of paint・varnish
