No.145-D RETENTIVITY TESTER
JIS Z0237
- This tester is to evaluate the retentivity of adhesive tape and sheet.
- By attaching one end of the test specimen to the testing plate for 25 mm squares and applying load to the other end of the test specimen which is vertically hung down, the tester will measure the distance it got out of alignment or the time it required to fall off from the testing plate.
No.145-D Specification
| Specifications are subject to change without notice. | |
| Hangings | 6, 10 or 21 Hangings (3 kinds) |
| Specimen | W25 mm or 12 ± 0.5 mm, L150 mm |
| Test Plate | W50 mm, L125 mm, T1.1 mm or More, Material: SUS304 Made |
| Weight Load | Initial 200 gf to Max. 1 kgf (Standard 1,000 g ± 5 g) |
| Chuck | Upper: Hook type Lower: Flat type (W30 mm) |
| Upper and Lower Chuck Distance | 200 mm |
| Chuck Stroke | Max. 45 mm, Electric Concurrent Elevating Device (Up and Down Automatic Stop) |
| Temperature Range | Max. 150 °C |
| Timer | Preheating Time Setting, Drop Time Measuring, Test Time Setting |
| Option | Displacement Measurement Spec, Low Temperature Oven, Constant Temperature & Humidity Oven, Oven Light, 90° Peeling Spec |
| Power Source | Differ by Specifications. |
| Dimensions/ Weight (Approx.) | Differ by Specifications. |
Contact Us
For over 70 years, Yasuda Seiki’s testing machines have supported quality control and research & development across various industries, meeting the diverse needs of our clients.
Other products
- No.145-G GEHMAN STIFFNESS TESTER | For Testing the Low Temperature Stiffness of Thermoplastic Rubber and Vulcanized Rubber
- No.183 FALLING BALL IMPACT TESTER｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- No.161 SPRING ELONGATION TESTER｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- No.258-ZA IMPACT TESTER (FULL AUTOMATIC)
- No.349 TAPE ADHESION ROLLER｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment. ｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- No.145 CREEP TESTER 【YASUDA-SEIKI】 Creep (Static Strain, Bending, Compression) Measurement
- Material Cutting Machine｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- No.181 Yasuda’s FILM IMPACT TESTER, Used for measuring Puncture Resistance by Pendulum Impact【YASUDA-SEIKI】
- No.306 Curated content of special Flexing ・Folding Endurance Tester【Yasuda Seiki】FPC Flexing Tester
- No.156 Maron Mechanical Stability Tester【YASUDA-SEIKI】This tester evaluates the mechanical stability of synthetic latex
