No.140-SAS AUTOMATIC CAPILLARY RHEOMETER
JIS K7199、ASTM D3835、ISO 11443
- This tester evaluates the flow feature of molten plastic during the forming process.
- The molten test sample inside the cylinder that is set at a specific temperature will be extruded from the capillary die.
- During the extrusion, the shear stress and the shear viscosity is detected to measure the melt viscosity of the sample.
- The tester is equipped with an automatic cleaning system which enables the operator to continuously run 1 test cycle.
- The tester can be chosen between the light load type and the heavy load type according to the samples maximum load.
No.140-SAS Specification
| Specifications are subject to change without notice. | ||
| Model | No.140-SAS LIGHT LOAD | No.140-SAS HEAVY LOAD |
| Hangings | 1 Hanging | 1 Hanging |
| Maximum Load | Max. 10 kN | Max. 20 kN |
| Load Measuring | Load Cell: Max. 10 kN (Scale 0.1 kN) | Load Cell, Max. 20 kN (Scale 0.1 kN) |
| Ram Speed | 0.5 to 500 mm/min | 0.5 to 1,000 mm/min |
| Capillary Die | φ0.5 to φ2 mm, L/D (To be specified) | φ0.5 to φ2 mm, L/D (To be specified) |
| Piston | φ9.510 ± 0.005 mm, L6.35 ± 0.10 mm | φ9.510 ± 0.005 mm, L6.35 ± 0.10 mm |
| Cylinder | Inner φ9.550 ± 0.025 mm, L160 mm | Inner φ9.550 ± 0.025 mm, L200 mmm |
| Temperature Range | Max. 400 °C | Max. 400 °C |
| Software | Windows Compatible | Windows Compatible |
| Accessories | Cleaning Rod (Die & Cylinder), Solvent Cleaning Device, Sample Cup, Cup Holder, Infundibulum, Die Gauge, Dust Box, Gauze, Air Gun, Ratchet Wrench | Cleaning Rod (Die & Cylinder), Solvent Cleaning Device, Sample Cup, Cup Holder, Infundibulum, Die Gauge, Dust Box, Gauze, Air Gun, Ratchet Wrench |
| Option | Hastelloy Spec, Sample Purging Device, Sample Drying Device, Air Compressor, Temperature Calibration Device, Exhaust Fan, Smoke-Detection Sensor | Hastelloy Spec, Sample Purging Device, Sample Drying Device, Air Compressor, Temperature Calibration Device, Exhaust Fan, Smoke-Detection Sensor |
| Power Source | AC 200 V, 1-Phase, 10 A, 50/60 Hz | AC 200 V, 1-Phase, 10 A, 50/60 Hz |
| Air Source | 0.5 MPa or More | 0.5 MPa or More |
| Dimensions/ Weight (Approx.) | W620 × D650 × H1,170 mm/ 153 kg | W620 × D600 × H1,460 mm, 205 kg |
Contact Us
For over 70 years, Yasuda Seiki’s testing machines have supported quality control and research & development across various industries, meeting the diverse needs of our clients.
Other products
- No.240 Tiptoe Exfoliation Tester【YASUDA SEIKI】For the tester to conduct an exfoliation test on the tiptoe of shoes
- No.181 Yasuda’s FILM IMPACT TESTER, Used for measuring Puncture Resistance by Pendulum Impact【YASUDA-SEIKI】
- No.453 Pilling Tester, No.473 Snag Tester｜For ICI Type Tester to conduct on textile and fabric
- No.274 PUMMEL TESTER【YASUDA-SEIKI】For Measuring the Pummel Value of PVB Film
- No.101 TABER TYPE ABRASION TESTER【YASUDA SEIKI】 For Abrasion Resistance Evaluation –We Also Provide TABER Wheels!
- 258 Series｜Charpy and Izod Impact Testers
- No.212 YSS HEAT SEALER・No.213 JIS HEAT SEALER【YASUDA-SEIKI】To evaluate the thermal adhesion of plastic film・cellophane tape
- No.402 Spray Tester【YASUDA SEIKI】For the tester to conduct a water repellency test (spray test) on textile・rubber・plastic
- No.120-SAS Melt Flow Index Tester (Automatic)
- No.220 DART IMPACT TESTER【YASUDA-SEIKI】For Evaluating the Impact Resistance of Plastic Film
