No.409 WATER PENETRATION RESISTANCE TESTER FOR TEXTILE
JIS L1092, ISO 811
- This tester is to conduct a water penetration test (hydrostatic fluid pressure method and A method, the low water pressure).
- Tightening the test specimen to the clamp and raising the water level at a constant speed, the operator is to measure the water level when the water comes out from 3 places of the back side of the test specimen.
- The tester can also conduct constant water pressure method and water leakage method.
Specification
| Specifications are subject to change without notice. | |
| Water Column | 1 m or 1.5 m |
| Manometer | 1,000 mmH2O or 1,500 mmH2O (Scale 1 mmH2O) |
| Pressing Speed | 10 ± 0.5 cm/min or 60 ± 3 cm/min |
| Specimen | 150 × 150 mm |
| Clamp | Inner Diameter φ113 mm (Effective Area 100 cm2) |
| Power Source | AC 100 V, 1-Phase, 3 A, 50/60 Hz |
| Dimensions/ Weight (Approx.) | 1m spec: W600 × D400 × H1,670 mm, 125 kg |
Contact Us
For over 70 years, Yasuda Seiki’s testing machines have supported quality control and research & development across various industries, meeting the diverse needs of our clients.
Other products
- No.318 Water Vapour Permeability Cup【YASUDA SEIKI】For the tester to evaluate the permeability of plastic film・processed paper
- No.517 DU PONT TYPE FALLING IMPACT TESTER【YASUDA-SEIKI】 For Testing Plastic Sheet and Paint Coat Durability
- No.120-LABOT Melt Flow Index Tester (Full Automatic)
- No.453 Pilling Tester, No.473 Snag Tester｜For ICI Type Tester to conduct on textile and fabric
- No.120-SAS Melt Flow Index Tester (Automatic)
- No.550 Gardner Type Mandrel Bending Tester【YASUDA SEIKI】To evaluate the bending stress of paint・varnish
- No.153 GEL TIME TESTER | The Best Suited Tester for Gel Time Measurement of Thermoplastic Resin
- plastic Strain tester｜No.105-AUTO AUTOMATIC WILLIAM TYPE PLASTOMETER・No.171 COMPRESSION SET TESTER・No.184-A MCBURNEY INDENTATION TESTER｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- No.128-3S SAMPLE DIMENSIONING DEVICE (AUTOMATIC) for Impact Testing
- No.433 Scott Type Crease-Flex Abrasion Tester｜For the tester to conduct a crease-flex abrasion test on textile・rubber・plastic
