No.173-S CUT-THROUGH TESTER (FOR ENAMELED WIRE)

JIS C3216-6: 2011

No.173-S ENAMELED WIRE SOFTENING POINT TESTER

  • This tester is used to measure the softening point of enameled wire according to the cross over method (method A).
  • The operator is to bisect 2 straight test specimens over a metal block that is set at a desired test temperature and to load a ceramic piston on to the crossing point.
  • The test is to be evaluated by whether the test specimen has softening short circuit after 2 minutes of test voltage is added.

Specification

Specifications are subject to change without notice.
Specimen Round wire(Crossing Method),Flat wire(Steel Ball Method)
Hangings Max. 12 Hangings(4 Hangings × 3ch)
Temperature Range Max.500℃
Heating Rate 2℃/min
Test Load Initial Load 100g to Max. Load 2,600g
Transformer Voltage: 100 ± 10V, Short Circuit Current: 5 ± 1 mA (Max. Ampair: 50 mA)
Data Processing Desktop PC (OS: Windows 10) PC Rack, Software included
Safety Device Leakage Breaker, Overheat Detection, insulated Safety Cover (Pinch Prevention)
Power Source Main Body: AC 200 V, 3-Phase, 50 A, 50/60 Hz , For PC: AC 100 V, 1-Phase, 15 A or less, 50/60 Hz
Dimensions/ Weight (Approx.) W1, 800 × D750 × H2,000 mm/ 550kg

 

Contact Us

For over 70 years, Yasuda Seiki’s testing machines have supported quality control and research & development across various industries, meeting the diverse needs of our clients.

Request a Quote / Contact Us

Other products

Product categories