No.453 ICI TYPE PILLING TESTER
JIS (L1018), L1058, L1076, (JASO)
- This tester is to conduct the piling test on textile and fabric according to the ICI type piling test method.
- The operator is to wrap the test specimen to a special rubber tube and put 4 of them into a rotating box that has cork board lined inside.
- Rotating the box at a prescript rotating speed, the operator is to compare the degree of piling among the test specimens and by using the piling judging picture.
Specification
| Specifications are subject to change without notice. | |
| Box Hanging | 3, 6, or 9 Hangings (3 kinds) |
| Specimen | 100 × 120 mm |
| Specimen Box | Inner Dimensions 230 × 230 × 230 mm |
| Box Rotation Speed | 60 ± 2 rpm |
| Rubber Tube | Outer Diameter φ31 mm (Rubber T3 mm), L150 mm, Mass 51 g |
| Timer | Max. 99 hr 59 min |
| Power Source | AC 100 V, 1-Phase, 10 A, 50/60 Hz |
| Dimensions/ Weight (Approx.) | 3 Hangings: W1,480 × D750 × H820 mm, 110 kg 6 Hangings: W1,480 × D750 × H1,200 mm, 165 kg 9 Hangings: W1,480 × D750 × H1,600 mm, 220 kg |
No.473 ICI TYPE MACE SNAG TESTER
JIS L1058, ASTM D3939
- This tester is used to conduct the snag test on textile and fabric according to the ICI type mace test method.
- Applying the spike ball (mace with needles) to the test specimen which is attached to the rotating cylinder, the operator is to compare the degree of the snag among the test specimens and by using the snag judging picture after the test specimen has be rotated 100 times.
Specification
| Specifications are subject to change without notice. | |
| Hangings | 2 Hangings (Individual Motioning type) |
| Specimen | 200 × 330 mm |
| Mace | φ31.8 mm, Mass 160 g (Including Needles) |
| Needle | 11 pcs, Top R0.127 mm, L9.5 mm |
| Rotating Drum | Outer Diameter φ82 mm (Rubber T3 mm), W210 mm |
| Drum Rotation Speed | 60 rpm |
| Felt | T3.2 mm, W165 mm |
| Guide Rod | Outer Diameter φ10 mm, W122 mm |
| Counter | 6 Digits Preset Counter |
| Drum-Guide Rod Distance | 60 mm |
| Mace-Guide Rod Distance | 46 mm |
| Accessories | Rubber Ring: 4 pcs, Setting Gauge: 1 pc, Specimen Setting Tool |
| Option | Safety Cover, Cabinet for Determination |
| Power Source | AC 100 V, 1-Phase, 5 A, 50/60 Hz |
| Dimensions/ Weight (Approx.) | Tester Body: W550 × D500 × H500 mm, 50 kg Cabinet: W500 × D590 × H500 mm, 25 kg |
Inquiry Form
Contact Us For over 70 years, Yasuda Seiki’s testing machines have supported quality control and research & development across various industries, meeting the diverse needs of our clients.
Other products
- No.550 Gardner Type Mandrel Bending Tester【YASUDA SEIKI】To evaluate the bending stress of paint・varnish
- No.189 NOTCHING MACHINE 【YASUDA SEIKI】 For Notching Charpy / Izod Impact Test Specimen
- No.349 TAPE ADHESION ROLLER｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment. ｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- No.161 SPRING ELONGATION TESTER｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- No.352 GURLEY TYPE WATER ABSORPTIVENESS TESTER(COBB METHOD）｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- No.402 Spray Tester【YASUDA SEIKI】For the tester to conduct a water repellency test (spray test) on textile・rubber・plastic
- No.553 PENCIL SCRATCH HARDNESS TESTER (Wolff-Wilborn Method) Determine the scratch hardness of a film coating by pencil hardness test. Available for demonstration!
- No.306 Curated content of special Flexing ・Folding Endurance Tester【Yasuda Seiki】FPC Flexing Tester
- No.274 PUMMEL TESTER【YASUDA-SEIKI】For Measuring the Pummel Value of PVB Film
- No.445 Elmendorf Type Tearing Resistance Tester For Textile【Yasuda Seiki】For the tester to evaluate tearing resistance according to Pendulum D Method
