No.161 SPRING ELONGATION TESTER
JIS (C3003), C3216-3, IEC-60851-3
- This tester is used to evaluate the softness of enamel wire according to the spring elongation method.
- One end of the testing coil is to be rolled to the mandrel and the other end attached to a weight which is placed on a supporting platform.
- The platform will then go down at a constant speed and when 1 minute has passed after the weight had separated from the supporting platform, the operator is to detach the weight and leave the testing coil for another 1 minute.
- The length difference of the coil before and after the test is to be noted as the spring elongation value.
Specification
| Specifications are subject to change without notice. | |
| Specimen | L1.2 m, Conductor Diameter φ0.25 to φ1.6 mm |
| Mandrel Rotation Speed | 50 rpm |
| Mandrel Diameter | φ2.5 to φ16 mm (Conductor Diameter φ × 10) |
| Weight | (Specimen Cross Section × 700) g |
| Holder Stroke | Max. 780 mm |
| Holder Speed | 50 mm/s |
| Timer | 60 sec Count |
| Option | Safety Cover |
| Power Source | AC 100 V, 1-Phase, 5 A, 50/60 Hz |
| Dimensions/ Weight (Approx.) | W500 × D530 × H1,500 mm, 85 kg |
Contact Us
For over 70 years, Yasuda Seiki’s testing machines have supported quality control and research & development across various industries, meeting the diverse needs of our clients.
Other products
- No.429 Olsen Type Stiffness Tester (For Light Load)｜To evaluate the bending reaction strength according to Bending Method
- No.220 DART IMPACT TESTER【YASUDA-SEIKI】For Evaluating the Impact Resistance of Plastic Film
- No.550 Gardner Type Mandrel Bending Tester【YASUDA SEIKI】To evaluate the bending stress of paint・varnish
- No.189 NOTCHING MACHINE 【YASUDA SEIKI】 For Notching Charpy / Izod Impact Test Specimen
- No.360 CURL-SIZE TESTER｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- This is a page for Stiffness Tester of Yasuda Seiki Seisakusho related on the textile products!
- No.149 STRESS-CRACKING TESTER｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- No.401 For the tester to evaluate the permeability according to Calcium Chloride Method (A-1 Method) or Water Method
- No.208 LOW-VOLTAGE CABLE ABRASION TESTER FOR AUTOMOBILE｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- flex-fatigue-testing machine｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
