No.162-EW SLIP TESTER (FOR ENAMELED WIRE)
- This tester is used to measure the Inclination Angle(Static Friction Coefficient) when the test specimen of enabled wire starts sliding.
- Fix 2 specimens parallel to one another onto the Sled and Inclination Board.
- Put the tension to 2 specimens on the board. Set the Sled on the Board, making each specimen get crossed when the Angle is 0°.
- Measure the Angle when the Mass starts sliding while the Board gets inclining at a certain speed. Static Friction Coefficient will be calculation as tanθ from the measured Angle.
No.162-EW Specification
| Specifications are subject to change without notice. | ||
|---|---|---|
| Model | No.162-EW | No.162-EWD |
| Sled | W120 mm, L120 mm, Mass 500 g | |
| Inclination Angle | 0 to 90° (Scale 0.2°) | 0 to 90° (Scale 0.2°) ※touch screen display 0.01° |
| Inclination Speed | 1°/s | |
| Option | Changeable Inclination Speed Spec | |
| Power Source | AC 100 V, 1-Phase, 3 A, 50/60 Hz (Motorized) | AC 100 V, 1-Phase, 5 A, 50/60 Hz |
| Dimensions/ Weight (Approx.) | W750 × D270 × H425 mm/ 30 kg | |
Contact Us
For over 70 years, Yasuda Seiki’s testing machines have supported quality control and research & development across various industries, meeting the diverse needs of our clients.
Other products
- No.283 PLASTIC SLIDING ABRASION TESTER【YASUDA-SEIKI】To evaluate the sliding abrasion
- No.524 Print Ink Drying Tester【Yasuda Seiki】For the tester to evaluate the drying characteristics of planographic ink
- No.201 Vinyl Leather Cloth Cold Proof Tester【YASUDA SEIKI】For the tester to conduct a cold temperature resistance test on plastic・rubberest on plastic・rubber
- No.258-ZA IMPACT TESTER (FULL AUTOMATIC)
- Enamel wire testing machine｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- No.304-TP Mullen High-Pressure Type Bursting Strength Tester【YASUDA SEIKI】To evaluate the bursting strength of paper・paper board・rubber・plastic
- No.541 Gardner Type Falling Sand Abrasion Tester【Yasuda Seiki】Evaluate the surface endurance of paint and metallic coatings
- No.517 DU PONT TYPE FALLING IMPACT TESTER【YASUDA-SEIKI】 For Testing Plastic Sheet and Paint Coat Durability
- Tester of Yasuda Seiki Seisakusho which has been custom made!【Yasuda Seiki】
- No.148 HDT Test [DTUL / VICAT], Heat Distortion (Deflection Under Load), Heat Distortion Tester
